The versatility of Pneumatic high stress grouting pumps

เกจอาร์กอน is designed for pressure and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes so as to reinforce the unfastened rock mass. The maximum grain measurement can’t exceed zero.2 mm.
Grouting pump operation and maintenance is simple, secure and dependable. compound gauge ราคา is used in mines working under troublesome situations as a outcome of it is reliable and explosion-proof.
Basic Pneumatic Grouting pump embody: An air inlet, the pneumatic cylinder, mounting base frame and stand, strain gauge, pumping cylinder, outlet with quick launch coupling and wheels.
How it works
Pneumatic stress within the air cylinder exerts a high stress on the grout combination which results in ejection of grout with a high strain and velocity. The valves of the air cylinder in the pump perform mechanically to actuate the cylinder. The pneumatic cylinder then strikes the plunger up and down to complete the pumping cycle.
Pneumatic grout pump may be driven even without Electrical energy supply in remote areas by using engine pushed compressor.
The pump is majorly used in construction and mining trade for injecting material into wide and medium measurement gap in beams, columns ,basement walls and flooring, raise shaft concrete wall fill-up etc. In mining industry it’s used to fill up cement resolution the place there’s a gap exists between structure and rock and for soil stabilization.
Detachable design tends to easy maintenance and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is extensively utilized in tunnels, coal mine, bridges and dams, constructing foundation, and other underground initiatives, and inflammable, explosive sites and different dangerous setting.
It has application in chemical trade additionally to pump out chemical slurries.
The pump is electricity free so, can be used at any website condition whether it is rural or city.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment vary. Generally the final quantity of the grouting volume is eight or10 occasions of the amount at first. And the final grouting amount proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specifically designed for high-pressure grouting. And it adopts full hydraulic drive, it’s strain and move can be adjusted according to the necessities of grouting,(The flow of grouting pump is 0-100L/min, strain of discharge is 0-10MPa).besides, This Pneumatic high-pressure grouting pump can be used for grouting single or double fluid.
High-pressure grouting pump is principally used for highways, railways, water and electricity, building, mining etc. ground/underground development.
Mining Pneumatic Grouting pump has the advantages of low vitality consumption, small vibration, low noise, small measurement, high effectivity, reliable efficiency, strain and circulate management, long life and so on. Common mine grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump is also Light weight and with a wheelie design it can be carried easily. It is designed for straightforward operation and low upkeep. Last but not least its spare components are simply obtainable.

Scroll to Top